Analysis of Single Punching Forging Press Setup by Using ANSYS
DOI:
https://doi.org/10.51983/ajsat-2016.5.1.2541Keywords:
Forging press, ANSYS, CATIA softwareAbstract
The proposed work is concern to study single punching forging press setup by carrying out analysis and stress distribution on die. To Analysis of stress distribution on base plate. Experimental system is to be developed to achieve the stated objective which includes mainly at examining the deformation and stresses on all main parts of the forging press setup The main feature of press is forging. A forging is produced by the downward stroke of the ram when the punch moves towards and into the die block set.
References
U.C. Rajmane, A.M. Nagaraj, "Design Development and stress analysis for 100 tons Twin punching forging Press," IJARSET, vol. 3, no. 01, pp. 01-05, January 2016.
S.S. Malipatil, Y.N. Potdar, and A.C. Mattikalli, "Analysis and structural optimization of 5 ton h-frame hydraulic press," IJISET, vol. 1, issue 5, pp. 45-50, July 2014.
S.M. Bapat and Y. Dessai, "Design and optimization of a 30 ton hydraulic forming press machine," IJRASET, vol. 2, issue 8, pp. 12-18, August 2014.
K. Raz, V. Kubec, and M. Cechura, "Dynamic behavior of the Hydraulic Press for free forging," in 25th DAAAM international symposium on intelligent manufacturing and automation, DAAAM 2014.
A.H. Parmar, K.P. Zala, and A.R. Patel, "Design and modification of foremost element of hydraulic press machine," vol. 3, issue 4, pp. 234-240, May-June 2014, ISSN 2249-9954.
B. Parthiban, P. Eazhumali, S. Karthi, and P. Kalimuthu, "Design and analysis of c type hydraulic press structure and cylinder," vol. 2, issue 3, March 2014.
M. Zahalka, "Modal analysis of hydraulic press frames for open die forging," in 24th DAAAM international symposium on intelligent manufacturing and automation, DAAAM 2013.
P. Zhu, L. Zhang, R. Zhou, L. Chen, B. Yu, and Q. Xie, "A Novel sensitivity analysis method in structural performance of hydraulic press," vol. 2012, Article ID 647127, 21 pages.
A.V. Javir, N.N. Manchekar, and R.D. Belekar, "Upgradation in hydraulic press machine," IJARSE, vol. 3, issue 11, November.
D. Sheth, S. Das, A. Chatterjee, and A. Bhattacharya, "Exploring forging load in closed – die forging," in Design and research Conference (AIMTDR 2014), December 12th-14th, 2014, IITGuwahati, Assam, India.
A.G. Naik, N.K. Mandavgade, "FEA implementation in analysis and optimization of top and bottom frame for hydraulic cotton lint bailing press," International Journal of Scientific & Engineering Research, vol. 3, issue 7, July 2012.
K. Sadasivan, "Experimental and finite element analysis of hydroforming process for stepped die," IOSR Journal of Mechanical and Civil Engineering (IOSR-JMCE), National Conference on Contemporary Approaches in Mechanical, Automobile and Building Sciences-2014.
L. Venugopal, "Analysis of tube end forming process using Taguchi design of Experiments," Usak University Journal of Material Sciences, vol. 2, pp. 137–145, 2012.
V. Kotev, "Forging Process Control by Additional Rocket Force," IJETAE, vol. 4, issue 8, August 2014.
M. Israr, "Design & Optimization of Power Press Machine," IJETI, vol. 2, issue 1, January 2015.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2016 The Research Publication
This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
