Friction Welding of AISI 304 and AISI 1021 Dissimilar Steels at 1600RPM
DOI:
https://doi.org/10.51983/arme-2013.2.2.2352Keywords:
Friction Welding, Dissimilar Materials, Mechanical testing, SEM analysisAbstract
Friction welding is a solid state joining process which is extensively used due to its advantages such as low heat input, ability to join dissimilar materials and environment friendliness. Friction welding can be used to join different kinds of materials which cannot be welded by conventional fusion welding processes. The rotational speed and the axial pressures are the important parameters that play the major role in determining the strength of the joint. In this study an attempt was made to join austenitic stainless steel (AISI 304) with low alloy steel (AISI 1021) at 1600 rpm and at different axial pressures and then determining the strength of the joint by means of mechanical properties such as tensile strength, torsional strength, impact strength and micro hardness. The tensile tested specimens were also subjected to SEM analysis to determine the failure pattern of the specimens
References
Ghander, G.S., Reddy, G.M.,Tagore, G.R.N., (2012), “Influence of process parameters on impact toughness and hardness of dissimilar AISI 4140 and AISI 304 continuous drive friction welds”, Int J AdvManufTechnology, Vol. 64,pp. 1445-1457.
Meshram, S.D., Mohandas, T., Reddy, G.M., (2008), “Friction welding of dissimilar pure metals”, J Mater Process Technology, Vol. 184, pp. 330-337.
Sathiya, P., Aravindan, S., Haq, N.A., (2007), “Some experimental investigations on friction welded stainless steel joints”, Material and Design, Vol. 153, pp. 1099-1109.
Sahin, M., (2004), “Simulation of friction welding using a developed computer program”, Journal of Material Processing and Technology, Vol. 153, pp. 1011-1018.
Sathiya, P., Aravindan, S., Haq, A.N., Paneerselvam, K., (2009), “Optimization of friction welding parameter using evolutionary computational techniques”, Journal of Materials Processing Technology, Vol. 209, pp. 2576-2584.
Sahin, M., Akata, H.E., Gulmez, T., (2007), “Characterization of mechanical properties in AISI 1040 parts welded by friction welding”, Materials characterization, Vol. 58, pp. 1033-1038.
Handa, A., Chawla, V., (2013), “Experimental study of mechanical properties of friction welded AISI 1021 steels”, Sadhana - Academy Proceedings in Engineering Sciences, Accepted for publication.
Sathiya, P., Aravindan, S., Haq, A.N., (2005), “Mechanical and metallurgical properties of friction welded AISI 304 austenitic stainless steel”, Int J AdvManufTechnol, Vol. 26, pp. 505-511.
Satyanarayana, V. V., Reddy, G. M., Mohandas, T., (2005), “Dissimilar metal friction welding of austenitic-ferritic stainless steel”, Journal of Materials Processing Technology, Vol. 160, pp. 128-137
Ozdemir, N. and Orhan, N., (2005) “Microstructure and mechanical properties of friction welded joints of a fine-grained hypereutectoid steel with 4% Al” Journal of Materials Processing Technology, Vol. 166, pp. 63-70.
Shribman V, Stern A, Livshitz Y and Gafri O. Magnetic pulse welding produces high strength aluminium welds. AWS Welding Journal April 2002.
Shribman V. Magnetic pulse welding for dissimilar and similar materials: 3rd international conference on high speed forming 2008: 13-22.
Ananthapadmanadan, D., Rao, V. S., Abraham, N, Rao, K. P., (2009) “ A study of mechanical properties of friction welded mild steel to stainless steel joints”, Materials and Design, Vol. 30, pp. 2642-2646
Ozdemir, N. and Orhan, N., (2005) “Microstructure and mechanical properties of friction welded joints of a fine-grained hypereutectoid steel with 4% Al” Journal of Materials Processing Technology, Vol. 166, pp. 63-70.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2013 The Research Publication
This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
