Optimization of Cutting Parameters in Rough Turning using Taguchi Method

Authors

  • Ajay P. Dhawan Assistant Professor, Mechanical Engineering Department, Sanjay Ghodawat Group of Institutions, Kolhapur, Maharashtra, India
  • Tanaji B. Shinde Assistant Professor, Mechanical Engineering Department, Sanjay Ghodawat Group of Institutions, Kolhapur, Maharashtra, India

DOI:

https://doi.org/10.51983/arme-2016.5.2.2415

Keywords:

Taguchi method, ANOVA, MRR, Surface roughness

Abstract

A machining process involves many process parameters which directly or indirectly influence the surface quality of the product. Current investigation on turning process is a Taguchi optimization technique applied on the most effective process parameters i.e. feed, cutting speed and depth of cut. In this project Taguchi method is used to optimize cutting parameter for surface roughness and material removal rate. The obtained results were verified by using minitab software. The optimized value of cutting speed, feed rate and depth of cut is obtained for both MRR (material removal rate) and Surface roughness. Confirmation test is carried out for the purpose of verification. Main effect plots are generated and analyzed to find out the relationship between cutting parameter and variables. The details of experimentation and analysis are given in the following context.

References

Krishankant, Jatin Taneja, Mohit Bector, Rajesh Kumar, Application of Taguchi Method for Optimizing Turning Process by the effects of Machining Parameters, International Journal of Engineering and Advanced Technology (IJEAT) ISSN: 2249 – 8958, Volume-2, Issue-1, October 2012

IlhanAsiltürk ,SüleymanNes eli ,Multi response optimization of CNC turning parameters via Taguchi method-based response surface analysis, Measurement 45 (2012) 785–794

Ali R. Yildiz, Hybrid Taguchi-differential evolution algorithm for optimization of multi-pass turning operations, Applied Soft Computing 13 (2013) 1433–1439

Quazi T Z , Pratik More , Vipulsonawane, Case Study of Taguchi Method in the Optimization of Turning Parameters, International Journal of Emerging Technology and Advanced Engineering Website: www.ijetae.com (ISSN 2250-2459, ISO 9001:2008 Certified Journal, Volume 3, Issue 2, February 2013)

Indrajit Mukherjee, Pradip Kumar Ray(2006) A review of optimization techniques in metal cutting processes, Department of Industrial Engineering and Management, Indian Institute of Technology, Kharagpur 721 302, India

M. Nalbant , H.Go¨kkaya, G. Sur, Application of Taguchi method in the optimization of cutting parameters for surface roughness in turning, Materials and Design 28 (2007) 1379–1385

Vishal Francis, Ravi.S.Singh, Nikita Singh, Ali.R.Rizvi, Santosh Kumar (2013) Application of Taguchi method and Anova in Optimization of cutting parameters for material Removal rate and surface roughness in turning Operation, Department of Mechanical Engineering, SSET, SHIATS, Allahabad – 211007, Uttar Pradesh, INDIA,( ISSN 0976 – 6359

Volume 4, Issue 3, May - June (2013), pp. 47-53)

Ajay Mishra, Anshul Gangele, Mohammad Israr: Application of Taguchi Approach in the Optimization of Roundness of Cylindrical Bars of AISI 1045 Steel

Ajay Mishra1, Dr. Anshul Gangele (2012) Application of Taguchi Method in Optimization of Tool Flank Wear Width in Turning Operation of AISI 1045 Steel, Research Scholar, Department of Mechanical Engineering, Suresh Gyan Vihar University, Jaipur.( ISSN 2224-6096 (Paper) ISSN 2225-0581 (online) Vol 2, No.8, 2012)

L B Abhang and M Hamudulla (2012) Optimization of machining parameter in steel turning operation by Taguchi method, Mechanical Engineering department, Aligarh Muslim university,202002,India.

S.R.Das, R.P.Nayak, D Dhupal (2012) Optimization of cutting parameter of tool flank wear and work piece surface temperature in turning of ASIS Steel (International journal of Thinking lean Volume 3,Issue 2)

M. Adinarayana, G. Prasanthi, G. Krishnaiah: Parametric analysis and multi objective optimization of cutting parameters in turning operation of aisi 4340 alloy steel with cutting tool (International Journal of Research in Engineering and Technology, eISSN: 2319-1163 pISSN: 2321-7308)

Hari Singh and Pradeep Kumar (2005) Optimizing cutting force for turned part by Taguchi parameter design approach, (Indian jornal of engineering and material science, Vol 12, April 2005, pp 97-103)

A.V.N.L.Sharma, K.Venkatasubbaiah, P.S.N.Raju (2013) Parametric Analysis and Multi Objective Optimization of Cutting Parameters in Turning Operation of EN353 With CVD Cutting Tool Using Taguchi Method, BITS-Visakhapatnam, Andhra University Visakhapatnam,

SCET-Narsapur (International Journal of Engineering and Innovative Technology (IJEIT) Volume 2, Issue 9, March 2013)

Shubhra Banerji (2012) Orthogonal Array Approach for Test Case Optimization, (International Journal of Advanced Research in Computer and Communication Engineering Vol. 1, Issue 9, November 2012)

Navandeep Singh Tung and Sukhjinder Singh: Selection of the Orthogonal Array in Turning of AISI D2 Steel (International journal of innovation research, Vol 2, Issue 6, ISSN: 22S78 – 0211)

Downloads

Published

05-11-2016

How to Cite

Dhawan, A. P., & Shinde, T. B. (2016). Optimization of Cutting Parameters in Rough Turning using Taguchi Method. Asian Review of Mechanical Engineering, 5(2), 31–41. https://doi.org/10.51983/arme-2016.5.2.2415

Issue

Vol. 5 No. 2 (2016): July-December 2016

Section

Articles

License

Copyright (c) 2016 The Research Publication

Creative Commons License

This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.