Review on Nanomaterials and Their Utilization in the Recovery of Waste Mechanical Energy by Using Piezoelectric Nanogenerators

Authors

  • Sakshi Mishra M.Tech in Heat Power Engineering, PVPIT, Sangli, Maharashtra, India & B.Tech in Mechanical Engineering, KIET, Ghaziabad, Uttar Pradesh, India

DOI:

https://doi.org/10.51983/arme-2019.8.2.2469

Keywords:

Nanomaterials, Waste Mechanical Energy, Piezoelectricity, ZnO

Abstract

Nano scale materials are defined as a set of substances where at least one dimension is less than approximately 100 nanometers. A nanometer is one millionth of a millimeter- approximately 100,000 times smaller than the diameter of a human hair. Nanomaterials are of interest because at this scale unique optical, magnetic, electrical, and other properties emerge. These emergent properties have the potential for great impacts in electronics, medicine, and other fields. Energy harvesting from the environment is one of the core features of a functional, self-sufficient nanosystem. Self-powered nanosystems combine the nanogenerator with functional nanodevices in order to harvest mechanical energy from the environment into electricity to power nanodevices. It can work independently, without any other external power sources. Piezoelectricity is the electric charge that accumulates in certain solid materials (such as crystals, certain ceramics, and biological matter such as bone, DNA and various proteins) in response to applied mechanical stress.Energy harvesting (or power scavenging) refers to capturing energy from environment, surrounding system or any other source and converting it into a usable form of energy to develop self-power system that doesn’t need external power supply e.g. piezoelectric process. In order to harvest the waste mechanical energy during various processes, piezoelectric properties of different materials such as ZnO can be utilised in order to convert the waste mechanical energy into electrical energy which could further be used.

References

L. H. Madkour, “Where Are Nanomaterials (Nms) Found?. In: Nanoelectronic Materials”, Advanced Structured Materials, Springer, Cham, Vol. 116, 2019.

A, Alagarasi, “Introduction to Nanomaterials”, National Center for Environmental Research, 2011.

Michael Berger, “Nanotechnology and the future of advanced materials”, Nanowerk Spotlight, 2010.

Nanogenerators and Self-Powered Nanosystems. Special Issue Information, Retrieved from https://www.mdpi.com

P. Muralt, in Encyclopedia of Materials: Science and Technology, 2001, Retrieved from https://www.sciencedirect.com

Advancements in Nanomaterials, Nasa Technology Transfer Program, Retrieved from https://technology.nasa.gov › patent › LEW-TOPS-27.

S. Vijayalakshmi and H. Grebel, “Nonlinear optical properties of nanostructures”, 2000,DOI:10.1016/b978-012513760-7/50050-2.

Tetsuo Soga, “Fundamentals of Solar Cell, Nanostructured Materials for Solar Energy Conversion”, Elsevier, pp. 3-43, 2006, Retrieved from http://www.sciencedirect.com.

E silver nano carbon nanotube fullerene photocatalyst, KL University, ECM 11EM401, Retrieved from https://www. coursehero.com.

Madkour and H. Loutfy, “Nanoelectronic Materials: Fundamentals and Applications”, Springer, eBook, International Publishing, 2019

A. Ponzoni, E. Comini and I. Concina, et al., “Nanostructured metal oxide gas sensors, a survey of applications carried out at SENSOR lab, Brescia (Italy) in the security and food quality fields”, Sensors (Basel),Vol. 12, No. 12, pp. 17023–17045, 12 Dec. 2012. DOI: 10.3390/s121217023.

Capolungo, Laurent, “Atomistic and Continuum Modeling of Nanocrystalline Materials: Deformation Mechanisms and Scale Transition”, eBook, Retrieved from https://www.springer.com,2009.

H. Gleiter, H. Hahn, T. Schimmel and J. Beilstein, Nanotechnol., Vol. 4, pp. 805-806, 2013. DOI:10.3762/ bjnano.4.91

Njuguna, James and Pielichowski, Krzysztof, “Polymer Nanocomposites for Aerospace Applications: Fabrication”, Advanced Engineering Materials, Vol. 6, pp. 193 – 203, 2004, DOI: 10.1002/adem.200305111.

AvinashKamble and VaibhavKulkarni, A Text Book of Metallurgy (Edition 2): Properties and Applications of Ferrous and Non-ferrous metals,Harshal E Publications, 2017.

L.B. Kong, Li, Tao, Hng, Huey, Boey, Freddy, Zhang, Tianshu and Li, Sean, “Waste Mechanical Energy Harvesting (I): Piezoelectric Effect”, 2014, DOI: 10.1007/978-3-642-54634-1_2.

M. AniMelfaRoji, JijiGb and T. AjithBosco Raj, “A retrospect on the role of piezoelectric nanogenerators in the development of the green world. Royal Society of Chemistry”, 2017, Retrieved from https://doi.org/10.1039/ C7RA05256A

Zhao Wang, Xumin Pan, Yahua He, Yongming Hu and HaoshuangGuand Yu Wang, “Piezoelectric Nanowires in Energy Harvesting Applications”, Advances in Materials Science and Engineering, Hindawi publications, Article ID 165631, 2015, Retrieved from http://dx.doi.org/10.1155/2015/165631

Vincent Chen, “Piezoelectric Nanogenerators for Self-Powered Nanosystems”, Submitted as coursework for PH240, Stanford University, Fall, 6 Dec. 2015. Retrieved from http://large.stanford. edu/courses/2015/ph240/chen-v1/

Wang, Zhong, Wang, Xudong, Song, Jinhui, Liu, Jin, Gao and Yifan, “Piezoelectric Nanogenerators for Self-Powered Nanodevices”, Pervasive Computing, IEEE, Vol. 7, pp. 49 – 55, 2008, DOI: 10.1109/MPRV.2008.14.

Kholkin, Andrei, N. Pertsev, Goltsev and Alexander, Piezoelectricity and Crystal Symmetry, 2008, DOI: 10.1007/ 978-0-387-76540-2_2.

MuktiNath Gupta, Suman and S. K. Yadav, Advance in Electronic and Electric Engineering, Research India Publications, Vol. 4, No. 3, pp. 313-318, 2014, Retrieved from http://www.ripublication. com/aeee.htm

Giant piezoelectricity from ZnO materials, comparable with perovskite, Science China Press, 2012, EurekAlert, 29-MAR-2012, Retrieved from https://www.eurekalert.org/pub_releases/2012-03/sicp-gpf032912.php

Andrea Dal Corso, Michel Posternak, RaffaeleResta, Alfonso BaldereschiCorso, Andrea, Posternak, Michel, Resta, Raffaele and A. Baldereschi, “Ab initio study of piezoelectricity and spontaneous polarization in ZnO”, Phys. Rev. B. Vol. 50, 1994. DOI: 10.1103/PhysRevB.50.10715.

A .J. Festschrift, Fu, Yong Qing, L. Garcia-Gancedo, X.Y. Du, Lu, Jian, Zhao, Xiubo, Iborra, Enrique, De Miguel-Ramos, Mario and W. Milne, “ZnO based SAW and FBAR devices for bio-sensing applications”, Journal of Non-Newtonian Fluid Mechanics, Vol. 222, 2014. DOI: 10.1016/j.jnnfm.2014.12.002.

Jianfeng Dai, ZhongqiangSuo, Zengpeng Li and ShanshanGao, “Effect of Cu/Al doping on electronic structure and optical properties of ZnO”, Results in Physics, Vol. 15, 2019, Retrieved from http://www.sciencedirect.com/ science/article/pii/S2211379719318832)

H. Xiang, Yang, Jinlong, Hou, Jeff and Zhu, Qingshi, “Piezoelectricity in ZnO nanowires: A first-principles study” Applied Physics Letters, Vol. 89, pp. 223111-223111, 2006, DOI: 10.1063/1.2397013.

Wang, Zhong, Song and Jinhui, “Piezoelectric Nanogenerators Based on Zinc Oxide Nanowire Arrays”, Science, Vol. 312, pp. 242-6, 2006, New York, DOI: 10.1126/science.1124005.

G. Zhu, R. Yang, S. Wang, and Z. L. Wang, “Flexible high-output nanogenerator based on lateral ZnO nanowire array”, Nano Letters, Vol. 10, No. 8, pp. 3151–3155, 2010.

Y. Hu, C. Xu, Y. Zhang, L. Lin, R. L. Snyder, and Z. L. Wang, “A Nanogenerator for energy harvesting from a rotating tire and its application as a self-powered pressure/speed sensor”, Advanced Materials, Vol. 23, pp. 4068–4071, 2011.

S. N. Cha, J. S. Seo, S. M. Kim et al., “Sound-driven piezoelectric nanowire-based nanogenerators”, Advanced Materials, vol. 22, no. 42, pp. 4726–4730, 2010.

C. Xu and Z. L. Wang, “Compact hybrid cell based on a convoluted nanowire structure for harvesting solar and mechanical energy”, Advanced Materials, vol. 23, no. 7, pp. 873–877, 2011.

Liu, Di, Yin, Xing, Guo, Hengyu, Zhou, Linglin, Li, Xinyuan,Zhang, Chunlei, Wang, Jie, Wang and Zhong, “A constant current triboelectric nanogenerator arising from electrostatic breakdown”, Science Advances, Vol. 5, 2019, DOI: 10.1126/sciadv.aav6437.

Downloads

Published

05-11-2019

How to Cite

Mishra, S. (2019). Review on Nanomaterials and Their Utilization in the Recovery of Waste Mechanical Energy by Using Piezoelectric Nanogenerators. Asian Review of Mechanical Engineering, 8(2), 1–6. https://doi.org/10.51983/arme-2019.8.2.2469