Advanced Beverage Can Crusher Machines: A Review
DOI:
https://doi.org/10.51983/arme-2020.9.1.2473Keywords:
Beverage, Cancrusher, review, advanced designsAbstract
Beverage Can crushing machine is a device, which is used to compact scrap metal Cansinto small size ones, and, in turn, the Canswould be reused later as new products. Many designs for the Can crushers are applied for such compacting process, some simple and other complicated. This work presents a review study for the advanced or up to date beverage Can crusher machines. Several issues described new designs for the advanced Cans crushing processes are presented in the current study.
References
S. A. Buza, K. A. Buza and K. Pllana, “Can crusher design in response to environmental concerns”, Journal of Trends in the Development of Machinery and Associated Technology, Vol. 18, No. 1, pp. 179-182,2014.
A. Alshammari and f. Alanazi, “Beverage can compaction machine”, Mechanical Engineering Department, PMU, Learning outcome assessment, ASSE2111
S. Husain and M. S. Sheikh, “Can crusher machine using scotch yoke mechanism”,International Conference on Advances in Engineering & Technology (ICAET-2014), pp. 60-63, 2014.
M. Belinda, “Analysis of the Recycling Method for Aluminum Soda Cans”, B.Sc. thesis, University of Southern Queensland, Faculty of Engineering and Surveying, 2006.
D. G. Altenpohl, Aluminum Technology Applications and Environment: A profile of a Modern Metal, The Aluminum Association, Washington D.C. and TMS, Warrendale, PA, pp.328-335, 1998.
H. Cheng, and X. Du, “On the dynamic Mechanism of developing recycling Economy for Enterprises in China”, International Journal of Social Ecology and Sustainable Development, Vol. 1, pp. 20-29, 2010.
A. Henry, “Aluminum engine”, Recycle Today, International Aluminum Institute, Vol. 44, pp. 8–12, 2007.
H. M. El-Zomor and M. Hany, “Enhancement in a Mechatronic Aluminum Beverage Cans Recycling Machine”, International Journal of Mechanical, Aerospace, Industrial, Mechatronic and Manufacturing Engineering Vol.7, No. 9, 2013.
A. Elfasakhany, “Patented of beverage cans crusher machine: A Brief Description Review”, Sent for publication to ARME, 2020.
A. Elfasakhany,"Beverage Can Crusher Machine Patents: A Review: Part I", Asian Review of Mechanical Engineering, Vol. 7, No. 2, pp. 62–69, 2018.
A. Elfasakhany,"Beverage Can Crusher Machine Patents: A Review (Part II)”, Asian Review of Mechanical Engineering, Vol.7, No. 2, pp. 76–82, 2018.
A. Elfasakhany,"Beverage Can Crusher Machine Patents: A Review Part (III)", Asian Review of Mechanical Engineering, Vol. 8, No. 1, pp. 1–7, 2019.
A. Elfasakhany,"Beverage Can Crusher Machine Patents: A Review (Part IV)", Asian Review of Mechanical Engineering, Vol. 8, No. 1, pp. 11–17, 2019.
A. Elfasakhany,"Beverage Can Crusher Machine Patents: A Review (Part V)", Asian Review of Mechanical Engineering, Vol. 8, No. 1, pp. 31–38, 2019.
A. Elfasakhany, “Beverage Cans Crusher Machine Patents: A Review: Part VI”, Journal of Environmental and Soil Sciences, vol. 4, No.3, pp.511–518, 2020.
A. Elfasakhany, “Beverage Cans Crusher Machine Patents: A Review: Part VII”, International Journal of Research and Scientific Innovation (IJRSI), Vol.7, No.4, pp. 239–247, 2020.
A. Elfasakhany “Beverage Cans Crusher Machine Patents: A Review: Part VIII”, International Journal of Research and Scientific Innovation (IJRSI), Vol.7, No.5, pp. 6–15, 2020.
L. Tao, N. Berge, A. Elfasakhany and X.S. Bai, “Experimental and Numerical Studies of A Pulverised Wood Flame”, 6th Europ. Conf. on Industrial Furnaces and Boilers, Portugal, 2002.
A. Elfasakhany, and X.S. Bai, “Simulation of Wood Powder Flames in a Vertical Furnace”, 3rd Medit. Combustion Symposium, Marrakech, pp. 144, 2003.
A. Elfasakhany, X.S. Bai, B. Espenas, L. Tao and J. Larfeldt, “Effect of Moisture and Volatile Releases on Motion of Pulverised Wood Particles”, 7th Int. Conf. on Energy for a Clean Environment, Lisbon, Portugal, pp. 167, 2003.
A. Elfasakhany, "Modeling of Pulverised Wood Flames", PhD Thesis, fluid mechanics Dept., Lund, Sweden, ISBN-13/EAN: 9789162864255, 2005.
A. Elfasakhany and X.S. Bai, “Modeling of Pulverised Wood Combustion: A Comparison of Different Models”, Prog. Comp. Fluid Dynamics (PCFD), Vol. 6, No. 4/5, pp. 188–199, 2006.
A. Elfasakhany, T. Klason and X.S. Bai, “Modeling of Pulverised Wood Combustion Using a Functional Group Model”, Combustion Theory and Modeling, Vol. 12, No.5, pp. 883–904, 2008.
A. Elfasakhany, E.Y. Rezola, K.B. Quiñones and R.S. Sánc, "Design and Development of a Competitive Low-cost Robot Arm with Four Degrees of Freedom", Modern Mechanical Eng, Vol. 1, pp. 47–55, 2011.
A. Elfasakhany, J. Hernández, J. C. García, M. Reyes and F. Martell, "Design and Development of House-Mobile Security System", Engineering, Vol. 3, pp. 1213–1224, 2011.
A. Elfasakhany, A. Arrieta, D. M. Ramírez and F. Rodríguez, "Design and Development of an Autonomous Trash Sorting System,". Global J. of Pure and Applied Sciences and Tech., Vol. 01i3, pp. 56–64, 2011.
A. Elfasakhany, L. Tao, B. Espenas, J. Larfeldt and X.S. Bai, "Pulverised Wood Combustion in a Vertical Furnace: Experimental and Computational Analyses," International Conference of Applied Energy, 2012.
A. Elfasakhany, "Improving Performance and Development of Two-Stage Reciprocating Compressors", Int. J. of Advanced Research in Eng. Tech. Vol. 3, No. 2, pp. 119–136, 2012.
A. Elfasakhany, "Modeling of Secondary Reactions of Tar (SRT) Using a Functional Group Model", Int. J. of Mech. Eng. Tech. Vol. 3, No. 3, pp. 123–136, 2012.
A. Elfasakhany, J. A. Alarcón and D. O. S. Montes, " Design and Development of an Automotive Vertical Doors Opening System (AVDOS)", Int. J. of Advanced Research in Eng. Tech. Vol. 3, pp. 176–186, 2012.
A.Elfasakhany, J. L. Jiménez, I. A. Rentería, J. M. Rubio and W. D. Ricardez, "Design, Development, Testing and Validation of an Automower Machine",Int. J. of Applied Mechanics and Physics, Vol. 1, No. 1, pp. 1–15, 2013.
A. Elfasakhany, "Investigation on performance and emissions characteristics of an internal combustion engine fuelled with petroleum gasoline and a hybrid methanol–gasoline fuel", Int. J. of Eng. Tech. (IJET-IJENS) Vol.13 No. 5, pp. 24–43, 2013.
A. Elfasakhany, L. Tao, B. Espenas, J. Larfeldt and X.S. Bai, "Pulverised Wood Combustion in a Vertical Furnace: Experimental and Computational Analyses", Applied Energy, Vol. 112, pp. 454–464, 2013.
A. Elfasakhany, "The Effects of Ethanol-Gasoline Blends on Performance and Exhaust Emission Characteristics of Spark Ignition Engines", Int. J. of Automotive Eng., Vol. 4, No. 1, pp. 608–620, 2014.
A. Elfasakhany, "Experimental study on emissions and performance of an internal combustion engine fueled with gasoline and gasoline/n-butanol blends", Energy Conversion Manage, Vol. 88, pp. 277–283, 2014.
A. Elfasakhany, L.X. Tao and X.S. Bai, "Transport of pulverized wood particles in turbulent flow: numerical and experimental studies", Energy Procedia, Vol. 61, pp. 1540–1543, 2014.
A. Elfasakhany, "Experimental investigation on SI engine using gasoline and a hybrid iso-butanol/gasoline fuel", Energy Conversion and Management, Vol. 95, pp. 398–405, 2015.
A. Elfasakhany,"Investigations on the effects of ethanol-methanol-gasoline blends in a spark-ignition engine: performance and emissions analysis", Engineering Science Technology, Vol. 18, pp. 713–719, 2015.
A. Elfasakhany,"Experimental study of dual n-butanol and iso-butanol additives on spark-ignition engine performance and emissions", Fuel, Vol. 163, pp. 166–174, 2016.
A. Elfasakhany,"Performance and emissions analysis on using acetone–gasoline fuel blends in spark ignition engine", Engineering Science Technology, Vol. 19, pp. 1224–1232, 2016.
A. Elfasakhany, T. K. Kassem, A.-F. Mahrous and K. K. Matrawy, " Study of heat storage using of PCM in solar distiller", WULFENIA, Vol. 23, No. 5, pp. 19–31, 2016.
A. Elfasakhany and A.-F. Mahrous, "Performance and emissions assessment of n-butanol–methanol–gasoline blends as a fuel in spark-ignition engines", Alexandria Engineering J., Vol. 55, pp. 3015–3024, 2016.
A. Elfasakhany, "Performance assessment and productivity of a simple-type solar still integrated with nanocomposite energy storage system", Applied Energy, Vol. 183, pp. 399–407, 2016.
A. Elfasakhany, "Engine performance evaluation and pollutant emissions analysis using ternary bio-ethanol–iso-butanol–gasoline blends in gasoline engines", Cleaner Production, Vol. 139, pp. 1057–1067, 2016.
A. Elfasakhany, "Performance and emissions of spark-ignition engine using ethanol–methanol–gasoline, n-butanol–iso-butanol–gasoline and iso-butanol–ethanol–gasoline blends: a comparative study",Engineering Science Technology, Vol. 19, pp. 2053–2059, 2016.
A. Elfasakhany, "Investigations on performance and pollutant emissions of spark-ignition engines fueled with n-butanol–, iso-butanol–, ethanol–, methanol–, and acetone–gasoline blends: a comparative study",Renewable & Sustainable Energy Reviews, Vol. 71, pp. 404–413, 2017.
A. Elfasakhany, " Design, analysis and optimization of the tail bearing housing of jet engine", J. Advances in Vehicle Engineering, Vol. 3, pp. 99–111. 2017.
A. Elfasakhany, " Reducing automobile pollutant emissions and re−using some of such emissions as a fuel", Ciência e Técnica J., Vol. 32, No 11, pp. 160–176, 2017.
M. M. Bassuoni, A. Elfasakhany, K. K. Matrawy and A-F. Mahrous,"Applying a hybrid air conditioning system for reducing energy consumption inside buildings using a desiccant cycle regenerated with solar energy",Ciência e Técnica J., Vol. 33, No.2, pp. 54–70, 2018.
A. Elfasakhany, "Exhaust emissions and performance of ternary iso-butanol–bio-methanol–gasoline and n-butanol–bio-ethanol–gasoline fuel blends in spark-ignition engines: assessment and comparison", Energy, Vol. 158, pp. 830–844, 2018.
Kh. Abdel-Aziz, Abo El-Nasr A. A., A. Elfasakhany, D. Saber, and M. Helal, "Influence of casting mould wall thickness on the properties and microstructure of A356 alloy reinforced with micro/nanoalumina particles", Arctic Journal., Vol. 71, pp. 26–39, 2018.
A. Elfasakhany, “Powder biomass fast pyrolysis as in combustion conditions: Numerical prediction and validation”, Renewable Energy Focus, Vol. 27, pp. 78-87, 2018.
A. Elfasakhany, M. M. Bassuoni,B. Saleh, M. Alsehli and Ayman A. Aly, “Biomass powder as a renewable fuel for internal combustion engines”, Arctic Journal, Vol. 71, pp. 42–52, 2018.
A. Elfasakhany and X. S. Bai, “Numerical and experimental studies of irregular-shape biomass particle motions in turbulent flows”, Engineering Science Technology, Vol. 22, pp. 249–265, 2019.
B. Saleh, Ayman A. Aly, M. M. Bassuoni, M. Alsehli, A. Elfasakhany and Khaled I.E. Ahmed, “Performance assessment of an integrated desiccant air conditioning system powered by solar energy using back propagation artificial neural network”, Arctic Journal., Vol. 72, No. 3, pp. 1–18, 2019.
A. Elfasakhany, “Adjustable throat-area expansion valves used in automotive air conditioning systems: A mini review”, International J. of Automotive Eng., Vol. 9, No. 1, pp. 2868-2875, 2019.
A. Elfasakhany, “Tire pressure checking framework: a review study”, Reliability Engineering and Resilience, Vol. 1, No. 1, pp. 12–28, 2019.
A.A Aly, B. Saleh, M.M. Bassuoni, M. Alsehli, A. Elfasakhany and K. Ahmed, “Artificial neural network model for performance evaluation of an integrated desiccant air conditioning system activated by solar energy”,AIMS Energy, Vol. 7, No.3, pp. 395–412, 2019.
B. Saleh, A.A. Aly, M. Alsehli, M.M. Bassuoni and A. Elfasakhany, “Performance investigation of a solar-driven ejector refrigeration cycle”, World Journal of Engineering, Vol. 16/5, pp. 625–635, 2019.
A. Elfasakhany, “How Evaporator of Automotive Air Conditioner is modelled? A Systematic Review”, Applications of Modeling and Simulation (AMS), Vol. 4. No.1, pp. 64–70, 2020.
M. Alsehli, B. Saleh, A. Elfasakhany, Ayman A. Aly, and M. M. Bassuoni, “Experimental study of a novel solar multi-effect distillation unit using alternate storage tanks”, Journal of Water Reuse and Desalination, In press, 2020.
A. Elfasakhany, Mishal Alsehli, Bahaa Saleh, Ayman A. Aly and Mohamed Bassuoni, “Renewable Pulverized Biomass Fuel for Internal Combustion Engines”, Processes, Vol. 8, No.4, pp. 465, 2020.
A. Elfasakhany, “Gasoline engine fueled with bioethanol-bio-acetone-gasoline blends: Performance and emissions exploration”, Fuel, Vol. 274, 117825, 2020.
A. Elfasakhany, Alcohols as Fuels in Spark Ignition Engines: Second Blended Generation, Book, Germany, ISBN: 978-3-659-97691-9, 2017.
A. Elfasakhany, Benefits and drawbacks on the use biofuels in spark ignition engines, Book, Mauritius, ISBN: 978-620-2-05720-2, 2017.
A. Elfasakhany, J. Marquez, E.Y. Rezola, and J. Benitez "Design and Development of an Economic Autonomous Beverage Cans Crusher", Int. J. of Mech. Eng. Tech. Vol. 3, No. 3, pp. 107–122, 2012.
A. Elfasakhany, "A new Patent of Beverage Cans Crusher Machine”, Current Alternative Energy, Vol. 2, pp. 123–131, 2018.
A. Elfasakhany, “Beverage cans crusher machine patent, Patent number: 4610”, Jan 10, 2016.
D. Mayo, “United States Patent No. 5967029”, 19 Oct. 1999.
G. Fry, “United States Patent No. 5469783”, 28 Nov.1995.
R.M. Davis, “United States Patent No. 5203261”, 20 April 1993.
M.H. Hiatt, “United States Patent No. 4103609”, 1 Aug. 1978.
H. M. El-Zomor and M. Hany, “Enhancement in a Mechatronic Aluminum Beverage Cans Recycling Machine”, International Journal of Mechanical, Aerospace, Industrial, Mechatronic and Manufacturing Engineering, Vol.7, No. 9, 2013.
A. Buza, Kastriot A. Buza and Krenar Pllana, “Can Crusher Design In Response To Environmental Concerns”, Journal of Trends in the Development of Machinery and Associated Technology, Vol. 18, No. 1, pp. 179-182, 2014.
S. Qais, S. Saif, S. Jafar and S. Nadeem, “FULLY AUTOMATIC CAN CRUSHER”, International Journal of Mechanical and Industrial Technology, Vol. 2, No. 2, pp. 155-159, 2015.
C. M. Akhairil and A. C. Zanuar, “Development of the can crusher machine”, Diploma in Mechanical Engineering, Faculty of Mechanical Engineering, Univerisity of Malaysia Pahang, Nov. 2008.
V. N. Kshirsagar, S.K. Choudhary and A.P. Ninawe, “An Automatic Approach for Can/Plastic Bottle Crusher Machine, International Journal Of Research In Aeronautical And Mechanical”, Engineering, Vol.2, No. 7, pp.102-113,2014.
V. N. Kshirsagar, S.K Choudhary and A.P Ninawe, “Design Consideration in an Automatic Can/Plastic Bottle Crusher Machine”, International Journal of Engineering Research and General Science, Vol. 2, No. 4, pp 769-779, 2014.
M. Zulkifli, “Design of recycle bin tin can crusher”, Diploma of Mechanical Engineering thesis, Faculty of Mechanical Engineering, University Malaysia Pahang, Oct. 2008.
S. Palanivelu, W. V. Paepegem, J. Degrieck, B. Reymen, J.-M. Ndambi, J. Vantomme, D. Kakogiannis, J. Wastiels and D. V. Hemelrijck, “Close-range blast loading on empty recyclable metal beverage cans for use in sacrificial cladding structure”, Engineering Structures, Vol. 33, pp. 1966–1987, 2011.
S. Palanivelu, W. V. Paepegem, J. Degrieck, S. De Pauw, J. Vantomme, J. Wastiels, D. Kakogiannis and D. V. Hemelrijck, “Low velocity axial impact crushing performance of empty recyclable metal beverage cans”, International Journal of Impact Engineering, Vol. 38, pp.622–636, 2011.
G.O. Verran, and U. Kurzawa, “An experimental study of aluminum can recycle using fusion in induction furnace”, Resources, Conservation and Recycling, Vol. 52, pp. 731–736, 2008.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2020 The Research Publication
This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
