Comparative Analysis for Helical Spring and Belleville Spring Used in Aerosol Container Valve
DOI:
https://doi.org/10.51983/arme-2012.1.1.2514Keywords:
Aerosol Container, Belleville Spring, Helical Spring, Analysis Ansys, Pro-eAbstract
Aerosol is to spray in fine particles from pressurized fluid. It is widely used in insect killer room freshener as well as perfumes. Various designs of such products are available and they are based on ergonomically as well as aesthetical consideration. In this paper, same consideration is used, model is made in Pro-e software and analysis is made in ANSYS software to justify the answer. Here, two different springs like Belleville as well as Conventional spring called “Helical Spring”. Due to application of same load on Belleville as well as helical spring, a graph of load versus deflection is produced. The objective of this work is to prevent the leakage as well as less pressure or effort application on valve of the aerosol container to spray the contains.
References
John Chadwick, “Particle Size Control in Aerosol Packages”, Spray Technology & Marketing, December 2004.
D. Chatterjee, A. Datta, A K Ghosh and S K Som, “Effects of Inlet Air Swirl and Spray Cone Angle on Combustion and Emission Performance of a Liquid Fuel Spray in a Gas Turbine Combustor”, IE (I) Journal.AS., 2004.
B. Digvijay, B. Kulshreshtha, B. Saurabh, Dikshit and S. A. Channiwala,” Variations of Spray Cone Angle and Penetration Length of Pressure Swirl Atomizer Designed For Micro Gas Turbine Engine”, International Journal of Dynamics of Fluids, 2009.
R.Holownicki, G.Doruchowski, A.Gody and W. Swiechowski, “Variation of Spray Deposit and Loss with Air-jet Directions”, 2002.
Developments of the Bonding Mechanism and Process in Cold Gas Dynamic Spray, Materials Review, 2007-08.
“Research Developments of Preparing Coatings by Cold Gas Dynamic Spraying”, Materials Review, 2008-09
“Preparation of Ni-based alloy diamond composite coatings by cold spray”, Materials Research and Application,2009-01
“Numerical simulation of supersonic free jet flow field in cold gas dynamic spraying technique” , Welding & Joining, 2008-09
“The Use of Computational Fluid Dynamic Code for Modelling Spray from a Mistblower”, Silsoe College, Cranfield Institute of Technology, Bedford, MK45 4DT, UK. Available 26 April 2002.
“The Bending-deformation Theory of Thick Plates and Its Application to Springs”, Application Research on the Negative Stiffness of Disk Spring used in Low Frequency Precision Vibration Isolation, New Technology & New Process, 2009-10
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2012 The Research Publication
This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
