Elastic Constants of Polymer Modified Fiber Reinforced Concrete

Authors

  • Uttam B. Kalwane Principal, Dr. D Y Patil School of Engineering and Technology, Pune (MS), Indi
  • Yuwaraj M. Ghugal Professor, Government College of Engineering, Karad (MS), India
  • Ajay G. Dahake Associate Professor, Marathwada Institute of Technology, Aurangabad (MS), India

DOI:

https://doi.org/10.51983/tarce-2014.3.2.2206

Keywords:

Polymer modified fiber reinforced concrete, modulus of elasticity, modulus of rigidity, Poisson’s ratio

Abstract

The results of an experimental investigation to study the effects of hooked steel fibers with varying dosage and polymer latex with fixed dosage in concrete are studied. In this experimental study, varying volume fraction of hooked steel fibers from 0% to 7% by weight of cement at the interval of 1% of fiber and SBR latex polymer of fixed volume of 15% by weight of cement were used. All specimens of only fiber content were water cured and specimens of polymer with fiber content were air cured. At the end of 28 days of curing period, destructive tests were carried out on concrete specimens to determine the elastic constants of fiber reinforced concrete and polymer modified steel fiber reinforced concrete. For the analysis of structures, the elastic constants are very important. The elastic constants are static modulus of elasticity (Es), dynamic modulus of elasticity (Ed), Poisson’s ratio (μ) and modulus of rigidity (G), etc.

References

Winterberg Ralf “Fibre Reinforced Concrete – A Modern Costefficient Construction Material”, ICI Journal, Vol. 11, Issue 3, pp. 34-45, 2010.

Kuder Katherine, G. Ozyurt, Nilufer, E. B. Mu, S. P. Shah “Rheology of Fiber- Reinforced Cementitious Materials”, Cement and Concrete Research, Vol. 37, Issue 2, pp. 191-199, 2007.

Balaguru P. and Najm H. “High-Performance Fiber-Reinforced Concrete Mixture Proportions With High Fiber Volume Fractions”, ACI Materials Journal, 101, Vol. 4, pp. 281-286, 2004.

Balaguru P. and Foden Andrew, “Properties of Fiber Reinforced Structural Lightweight Concrete”, ACI Structural Journal, Vol. 93, Issue 1, pp. 62-78, 1996.

Parameswaran V. S. “High- Performance Fibre Reinforced Concretes”, The Indian Concrete Journal, pp. 621-627, 1996.

ACI Committee 548 (ACI 548.5R), “Guide for Polymer Concrete Overlays”, ACI Materials Journal, pp. 499-522, 1993. [7] ACI Committee 548 (ACI 548.1 R.86), “Guide for the Use of Polymers in Concrete”, ACI Journal, Vol. 83, pp. 798-829, 1986.

Singh Anupam, Lakhani Rajni, et al, “A Review on Polymer Modified Cementitious System for Building Applications”, Civil Engineering and Construction Review, Vol. 19, Issue 10 (CE & CR), pp. 33-39, 2006.

Davidson James S., et al, “Failure Mechanisms of Polymer- Reinforced Concrete Masonry Walls Subjected to Blast”, Journal of Structural Engineering, ASCE, Vol. 131, Issue 8, pp. 1194- 1205, 2005.

ACI Committee 548 (ACI 548.4), “Standard Specification for Latex-Modified Concrete (LMC) Over Lays”, ACI Materials Journal, Vol. 89, Issue 5, pp. 521-526, 1992.

Yazici Semsi, Inan Gozde, et al, (2007) Effect of aspect ratio and volume fraction of steel fiber on the mechanical properties of SFRC,” Construction and Building Materials, Vol. 21, pp. 1250-1253, 2007.

Christopher K.Y. Leung, Raymond Lai, et al, “Properties of Wet- Mixed Fiber Reinforced Shotcrete and Fiber Reinforced Concrete with Similar Composition”, Cement and Concrete Research, Vol. 35, pp. 788-795, 2005.

Ghugal Y. M. “Effect of Steel Fibers on Various Strengths of Concrete”, ICI Journal, pp. 23-29, 2003.

Nehdi Moncef and Ladanchuk Jennifer Duquette, “Fiber Synergy in Fiber- Reinforced Self- Consolidating Concrete”, ACI Materials Journal, pp. 508-517, 2004.

Nutter Charles, Kalahasti Srikanth, Panchalan Ramesh K. and Ramakrishna V. “International Centre for Fibre Reinforced Concrete Composite (ICFRC)”, Technical Manual, TM 9, pp. 1- 8, 2005.

Kurugol Sedat, Tanacan Leyla, Halit Ersoy, Yasa, “Young’s modulus of fiber- reinforced and polymer- modified light weight concrete composites”, Construction and Building Materials, pp. 1-10, 2007.

Bhikshma V. and Singh L., Jail, “Investigations on Mechanical Properties of Recycled Aggregate concrete containing steel fibers”, ICI Journal, Vol. 10, Issue 4, pp. 15-19, 2010.

Job Thomas and Ananth Ramaswamy, “Mechanical Properties of Fiber – Reinforced Concrete”, Journal of Materials in Civil Engineering, ASCE, Vol. 19,Issue 5, pp. 385-392, 2007.

Sedat Kurugol, Leyla Tanacan, Halit Yasa Ersoy, “Young’s modulus of fiber- reinforced and polymer- modified light weight concrete composites,” Construction and Building Materials , Accepted 19th March 2007, pp. 1-10, 2007.

Downloads

Published

05-11-2014

How to Cite

Kalwane, U. B., Ghugal, Y. M., & Dahake, A. G. (2014). Elastic Constants of Polymer Modified Fiber Reinforced Concrete. The Asian Review of Civil Engineering, 3(2), 27–40. https://doi.org/10.51983/tarce-2014.3.2.2206