The Effects of Sodium Hydroxide and Soda AQ Content on Mechanical and Physical Properties of Waste Flax Fibre Pulp Reinforced Polymer Composite Sheet

Authors

  • Anupam Kumar Professor, Department of Textile Engineering, Giani Zail Singh Campus College of Engineering and Technology, Maharaja Ranjit Singh Punjab Technical University, Punjab, India
  • Ramratan Assistant Professor, Department of Textile Engineering, Giani Zail Singh Campus College of Engineering and Technology, Maharaja Ranjit Singh Punjab Technical University, Punjab, India
  • Rohit Kumar Research Scholar Department of Textile Engineering, Giani Zail Singh Campus College of Engineering and Technology, Maharaja Ranjit Singh Punjab Technical University, Punjab, India

DOI:

https://doi.org/10.51983/ajeat-2020.9.2.1090

Keywords:

Flax fiber pulp, Epoxy resin, Hardener, Tensile strength, Impact strength, SEM

Abstract

The aim of this study is utilized agricultural waste which may be profitable, pollution free and economically viable for the farmer and industries. In this experiment short flax fiber pulp is the natural fiber component chemically treated with alkaline solutions. Six specimens will be prepared in different volume percentage of flax fiber pulp and epoxy resin in order to get more accurate results. In this study it has been aimed to use flax fibres in composite materials and to study the mechanical properties of the produced samples.  The mechanical tests results (thickness test, Tensile strength and impact strength tests) and SEM micrographs indicated flax fibres as an alternative natural fibre source for developing reinforced composites for various industries. The content of short flax fiber pulp is varied (35%, 45%, 55%) weight percentage whereas the epoxy resin is varied (50%, 40%, 30%) percentage is kept constant 15% in hardener. All the sample have been tested in universal testing machine as per ASTM standard for tensile strength and impact strength it is observed that composite with 35% flax fiber pulp is having highest tensile strength of 4 mm (4.57 Mpa) and 8 mm (6.04 Mpa). The impact strength of composite with 35% flax fiber pulp was highest than 45% to 55% flax fiber pulp.

References

Nattakan Soykeabkaew, Pitt Supaphol and Ratana Rujiravanit, “Preparation and characterization of Jute- and flax-reinforced starch-based composite foams. Polymer processing and polymer nanomaterials research unit”, The Petroleum and Petrochemical College, Chulalongkorn University, Soi Chula 12, Phyathai Road, Pathumwan, Bangkok 10330, Thailand.

M. Thiruchitrambalam, A.Alavudeen, A.Athijayamani, Venkateshwaran and A.ElayaP, “Improving mechanical properties of banana/kenaf polyester hybrid composites using sodium laulryl sulfate treatment” , Materials Physics and Mechanics Vol. 9, pp.165-173, 2009.

K.C.M. Naira, “Rheological behavior of short sisal fiber-reinforced polystyrene composites”, Composites: Part A, Vol. 31, pp. 1231-1240, 2000.

M. Ramesh, “Mechanical property evaluation of sisal-jute-glass fiber reinforced polyester composites”, Composites: Part B, Vol. 48, pp. 1-9, 2013.

Arun Kumar Rout and AlokSatapathy, “Study on mechanical and tribo – performance of rice -husk filled glass-epoxy hybrid composites”, Materials and Design, Vol. 41, pp.131-141, 2012.

M. Haameem J.A, M. S. Abdul Majid, M. Afendi, H. F. A. Marzuki, I. Fahmi, and A. G. Gibson, “Mechanical properties of napiergrass fibre/polyester composites”, Composite Structures, Vol. 2, pp.1-10, 2016.

Nasmi Herlinasari and I. N. G. Wardana, Yudy Surya Irawan and S. Eko, “Physical and acoustical properties of corn husk fiber panels”, Advances in Acoustics and Vibration, Vol. 2, pp.1- 8, 2016.

Henry C. Obasi, “Peanut husk filled polyethylene composites: effects of filler content and compatibilizer on properties”, Journal of Polymers, Vol. 1, pp.1-9, 2015.

Akshay N Baria and Sagar Choksi, “Wear and friction behaviour of corn husk fiber reinforced polyestercomposites”, International Journal for Scientific Research &Development, Vol.4, pp. 803-806, 2016.

Sudeep Deshpande and T R, “Effect of Fillers on E-Glass/Jute Fiber Reinforced Epoxy Composites”, International Journal of Engineering Research and Applications, Vol. 4, pp.118-123, 2014.

Sandhyarani Biswas, Alok Satapathy and P. Amar, “Effect of ceramic fillers on mechanical properties of bamboo fiber reinforced epoxy composites acomparative study”, Advanced Materials Research, Vol. 123, pp. 1031-1034, 2010.

Akindapo Jacob Olaitan, T.AGOV Emmanuel and G. Danladi King, “Rapheal Oluwatoyin. Comparative assessment of mechanical

properties of groundnut shell and rice husk reinforced epoxy composites”, American Journal of Mechanical Engineering, Vol. 5, pp. 76-86, 2017.

K. Selakumar and M.Omkumar , “Characterization of human hair fiber reinforced polymer composites”, Proceedings of an International Conference on Recent Trends in Nature Production Engineering, MIT, Anna University,Vol. 2, pp. 83-84, 2017.

Yan Li, Yiu-Wing Mai and Lin Ye, “Sisal fibre and its composites: a review of recent developments”, Composites Science and Technology, Vol. 60, pp. 2037-2055, 2000.

P. Kandachar and R. Brouwer , “Applications of bio-composites in industrial products”, Mater Res Soc Symp Proc, Vol. 702, pp. 101-112, 2002.

Anon., “The competitiveness of natural fibers-based composites in the automotive sector the Sisal Agribusiness in Brazil”, Mater Res Soc Symp Proc, Vol. 702, pp.113-39, 2002.

C. Santulli, “Post-impact damage characterization on natural fiber reinforced composites using acoustic emission”, NDT&E International, Vol. 34, pp. 531-6, 2001.

Andrzej K. Bledzkia, Wenyang Zhang and C. Andris , “Natural-fibre-reinforced polyurethane micro foams”, Composites Science and Technology. Vol. 61, pp. 2405-2411, 2001.

Senthil Kumar, I. Siva, P. Jeyaraj, J.T. Winowlin J, S.C. Amico and N. Rajini, “Synergy of fiber length and content on free vibration and damping behavior of natural fiber reinforced polyester composite beams”, Materials and Design. Vol. 56, pp. 379-386, 2014.

Downloads

Published

05-11-2020

How to Cite

Kumar, A., Ramratan, & Kumar, R. (2020). The Effects of Sodium Hydroxide and Soda AQ Content on Mechanical and Physical Properties of Waste Flax Fibre Pulp Reinforced Polymer Composite Sheet. Asian Journal of Engineering and Applied Technology, 9(2), 8–15. https://doi.org/10.51983/ajeat-2020.9.2.1090