Modeling and Optimization of Carbon Dioxide Removal in Packed Bed Column Reactor
DOI:
https://doi.org/10.51983/ajeat-2019.8.3.1168Keywords:
CO2 Capture, Packed Bed Column, Poly-(D) Glucosamine, Adsorption, OptimizationAbstract
Global warming due to greenhouse gases has become a serious global issue. Extensive efforts are being made to fighting this phenomenon through carbon capture as carbon dioxide (CO2) is its major contributor. This study focused on CO2 capture in packed bed column reactor using Poly-(D) glucosamine under the various process parameters such as temperature, feed flow rate and mass of the adsorbent. Statistical design of experiments was carried out in order to analysis the effect process parameters on the capacity of CO2 capture in packed bed column. The obtained results show that feed flow rate has the significant affect compared to others. The maximum of 956 mg of CO2 is captured under the following operating conditions; temperature of 40oC, feed flow rate of 30 ml/min and 0.25 g of the Poly-(D) glucosamine. The ability of Poly-(D) glucosamine to capture the CO2 in packed bed column is confirmed.
References
A. L. Anoar, G. N. Haldera, and A. K. Sahab, "Experimental investigation on efficient carbon dioxide capture using piperazine (PZ) activated aqueous methyldiethanolamine (MDEA) solution in a packed column," International Journal of Greenhouse Gas Control, vol. 64, pp. 163-173, 2017.
C. Chen, J. Kim, D. Park, and W. Ahn, "Ethylenediamine grafting on zeolite like metal organic frameworks (ZMOF) for CO2 capture," Materials letters, vol. 78, pp. 344-347, 2013.
C. Chen, J. Kim, D. Yang, and W. Ahn, "Carbon dioxide adsorption over zeolite-like metal organic frameworks (ZMOFs) having a sod topology: structure and ion exchange effect," Chemical Engineering Journal, vol. 168, pp. 1134-1139, 2011.
T. Chitsiga, M. Daramola, N. Wagner, and J. Ngoy, "Effect of the presence of water-soluble amines on the carbon dioxide (CO2) adsorption capacity of amine-grafted polysuccinimide (PSI) adsorbent during CO2 capture," Energy Procedia, vol. 90, pp. 105-86, 2016.
W. Haohan, G. Charles, S. Thibault, W. Hao, and A. Katie, "Effect of temperature on hydrogen and carbon dioxide adsorption hysteresis in an ultramicroporous MOF," Microporous and Mesoporous Materials, vol. 5, pp. 186-189, 2016.
A. Imteaz and H. Sung, "Composite of metal organic framework: Preparation and Application in adsorption," Materials today, vol. 24, pp. 138-146, 2014.
J. Lin, D. Kang, H. Shan, S. Shi, and T. Chung, "A comparison between packed beds and rotating packed beds for CO2 capture using monoethanolamine and dilute aqueous ammonia solutions," International Journal of Greenhouse Gas Control, vol. 46, pp. 228–239, 2016.
W. Lei, J.Wang, Z. Zhang, T. Ziting, S Jiang, and L. Chunrong, "Development of Ionic Liquids Tethered to Coconut Shell Activated Carbon for Biogas Upgrading in a Packed Bed," Energy Technol., vol. 3, pp. 509-517, 2015.
J. Ma, C. Xin, and C. Tan, "Preparation, physicochemical and pharmaceutical characterization of chitosan from Catharsius molossus residue," International Journal of Biological Macromolecules, vol. 15, pp. 547-556, 2015.
W. Ningning, Z. Yan, C. Changhong, C. Linyu, and D. Hanming, "A g-C3N4 supported graphene oxide/Ag3PO4 composite with remarkably enhanced photocatalytic activity under visible light," Catalysis Communications, vol. 15, pp. 68-73, 2015.
J. Prakash Maran, V. Sivakumar, R. Sridhar, and K. Thiruganasambandham, "Artificial neural network and response surface methodology modeling in mass transfer parameters predictions during osmotic dehydration of Carcia papaya L," Alexandria Engineering Journal, vol. 52, pp. 507-516, 2013.
S. Praveen and P. P. Selvi, "Absorption of Carbon dioxide in Packed Column," International Journal of Scientific and Research Publications, vol. 4, pp. 1-11, 2014.
J. Rowsell and O. Yaghi, "Metal-organic frameworks: a new class of porous materials," Microporous and Mesoporous Materials, vol. 3, pp. 14-22, 2004.
G. Shaohua, L. Pan, Y. Haijun, Z. Yanbei, C.Mingwei, I. Masayoshi, and Z. Haoshen, "A Layered P2- and O3-Type Composite as a High-Energy Cathode for Rechargeable Sodium-Ion Batteries," Ind.Eng.Chem.Res., vol. 54, pp. 5894 – 5900, 2015.
K. Thirugananasambandham and V. Sivakumar, "Eco-friendly approach of copper (II) ion adsorption on to cotton seed cake and its characterization: Simulation and Validation," Journal of the Taiwan Institute of Chemical Engineers, vol. 50, pp. 198–204, 2015.
M. Wang, A. Lawal, P. Stephenson, J. Sidders, and C. Ramshaw, "Post-combustion CO2 capture with chemical absorption: A state-of-the-artreview," Chemical Engineering Research and Design, vol. 11, pp. 1609-1624, 2011.
C. Yu, C. Huang, and C. Tan, "A Review of CO2 Capture by Absorption and Adsorption," Taiwan Association for Aerosol Research, vol. 12, pp. 745-769, 2012.
Q. Yu and D. W. F. Brilman, "Design Strategy for CO2 Adsorption from Ambient Air Using a Supported Amine Based Sorbent in a Fixed Bed Reactor," Energy Procedia, vol. 11, pp. 6102-6114, 2017.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2019 The Research Publication
This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
