An Overview of Hydroxyapatite Coated Titanium Implants

Authors

  • Pankaj Vikas Rattan Dept. of Mech. Engg., Amritsar College of Engineering and Technology, Amritsar -143 001, Punjab, India
  • T. S. Sidhu Shaheed Bhagat Singh College of Engineering and Technology, Ferozepur -152 004, Punjab, India
  • Manoj Mittal Aryabhatta Group of Institutes, Barnala - 148 101, Punjab, India

DOI:

https://doi.org/10.51983/ajeat-2012.1.2.2490

Keywords:

Hydroxyapatite, Implants, Titanium, Biomaterials

Abstract

Hydroxyapatite [(HA), Ca10 (PO4)6 (OH)2] is the main mineral component of bone and teeth. It has favorable osteoconductive and bioactive properties that is necessary for the early bone formation and fixation. HA being identified as the major mineral constituent of hard tissue, plays a vital role in orthopedic applications. One of its major applications is as a covering material for titanium and other metals used in implants. Main metallic biomaterials are stainless steel; Co based alloys, titanium and its alloys. Amongst the metallic biomaterials titanium and its alloys are getting much attention for use as biomaterials due to their excellent specific strength, corrosion resistance and above all good biocompatibility. Pure titanium and Ti-6AL-4V are still the most widely used biomaterials for biomedical applications among the titanium alloys. This article briefly reviews the hydroxyapatite coated titanium implants and its effects on the performance of the implants.

References

Gu.Y.W., Khor.K.A. and Cheang.P.(2004),“Bone-like apatite layer formation on hydroxyapatite prepared by spark plasma sintering (SPS)” ,Biomaterials., , Vol.25, pp 4127–4134.

Yip.C.S., Khor.K.A., Loh.N.L. and Cheang.P.(1997), “Thermal spraying of Ti-6AL-4V / hydroxyapatite composites coatings : powder processing and post spray treatment”, Journal of Material Processing Technology, Vol .65, pp 73-79.

Li.H., Khor.K.A.and Cheang.P. (2002), “ Titanium dioxide reinforced hydroxyapatite coatings deposited by high velocity oxy-fuel (HVOF) spray”, Biomaterials, Vol .23, pp 85–91.

Haman.Jeannie D.,Lucas Linda C.and Crawmer Daryl.(1995), “Characterization of high velocity oxy-fuel combustion sprayed hydroxyapatite”, Biomaterials, Vol.16,pp 229-237.

Niinomi Mitsuo.(2003) “Recent research and development in titanium alloys for biomedical applications and healthcare goods”,Science and Technology of Advanced Materials, Vol. 4 ,pp 445–454.

Oonishi H., Yamamoto M., Ishimaru H., Tsuji E., Kushitani S., Aono M. and Ukon Y.(1989) , “ The effect of hydroxyapatite coating on bone growth into porous titanium alloy implants, Journal of Bone Joint Surgery, Vol. 71(B), pp 213-216.

R.Heleno., N. S Wagner. and Branco J. R. T.(2009) , “Performance Evaluation of Hydroxyapatite Coatings Thermally Sprayed on Surgical Fixation Pins”, Key Engineering Materials, Vol.396-398,pp 69-75.

Quek C.H., Khor K.A.and Cheang P.(1999), “Influence of processing parameters in the plasma spraying of hydroxyapatite/ Ti-6Al-4V composite coatings”,Journal of Materials Processing Technology,Vol. 89-90, pp 550-555.

Rautray.Tapash R., Narayanan .R. and Han Kim Kyo.(2011), “ Ion implantation of titanium based biomaterials” , Progress in Materials Science,Vol. 56, pp 1137–1177.

Bharati S, Sinha M.K.and Basu D. (2005), “Hydroxyapatite coating by biomimetic method on titanium alloy using concentrated SBF”, Buletin. Material. Science, Vol. 28, pp 617–621.

Teraoka K. , Nonami T., Doi Y. , Taoda H., Naganuma K. ,Yokogawa Y.and Kameyama T.(2000), “ Hydroxyapatite implantation on the surface of pure titanium for orthopedic implants”, Materials Science and Engineering,Vol. 13, pp 105–107.

Hare Peter O’., Meenan Brian J., Burke George A. , Byrne Greg., Dowling Denis.and Hunt John A. (2010), “ Biological responses to hydroxyapatite surfaces deposited via a co-incident micro blasting technique”, Biomaterial,Vol. 31,pp 515–522.

Khor K.A., Yip C.S.and Cheang P.(1997), “ Post-spray hot isostatic pressing of plasma sprayed Ti-6AI-4V/hydroxyapatite composite coatings”, Journal of Materials Processing Technology, Vol. 71,pp 280-287.

Cabrini M., Cigada A., Rondelli G.and Vicentini B.(1997) ,“Effect of different surface finishing and of hydroxyapatite coatings on passive and corrosion current of Ti6Al4V alloy in simulated physiological solution” , Biomaterials,Vol. 18, pp 783-787.

Krupa D., Baszkiewicz J., Kozubowski J.A., Barcz A., Sobczak J.W., Bilinski A., Lewandowska-Szumiel M. and Rajchel B .(2001), “Effect of calcium-ion implantation on the corrosion resistance and biocompatibility of titanium”, Biomaterials,Vol.22,pp 2139-2151.

Park Jin-Woo., Park Kwang-Bum.and Suh Jo-Young.(2007), “Effects of calcium ion incorporation on bone healing of Ti6Al4V alloy implants in rabbit tibiae”, Biomaterials,Vol. 28,pp 3306–3313.

Lynn A.K. and DuQuesnay D.L.(2002),“ Hydroxyapatite-coated Ti– 6Al–4V Part 1: the effect of coating thickness on mechanical fatigue behavior”, Biomaterials,Vol.23,pp 1937–1946.

. Hayashi K., Mashima T.and Uenoyama K.(1999), “ The effect of hydroxyapatite coating on bony in growth into grooved titaniumimplants”, Biomaterials,Vol.20,pp111-119.

Porter A.E., Hobbs L.W., Rosen V. Benezra.and Spector M.(2002), “The ultra structure of the plasma-sprayed hydroxyapatite–bone interface predisposing to bone bonding”, Biomaterials, Vol.23, pp 725–733.

Elias Carlos Nelson., Oshida Yoshiki., Lima José Henrique Cavalcanti. and Muller Carlos Alberto.(2008), “ Relationship between surface properties (roughness, wettability and morphology) of titanium and dental implant removal torque”, Journal of Mechanical behavior of biomedical materials,Vol.1, pp 234-242.

Lim V.J.P., Khor K.A., Fu L.and P. Cheang.(1999), “ Hydroxyapatitezirconia composite coatings via the plasma spraying process”,Journal of. Materials Processing Technology,Vol. 89-90, pp 491-496.

Lu Yu-Peng., Li Mu-Sen., Li Shi-Tong., Wang Zhi-Gang. and Zhu Rui-Fu.( 2004), “ Plasma-sprayed hydroxyapatite+titania composite bond coat for hydroxyapatite coating on titanium substrate”, Biomaterials,Vol. 25,pp 4393–4403.

Vadiraj Aravind.and Kamaraj M.(2007), “ Effect of surface treatments on fretting fatigue damage of biomedical titanium alloys”, Tribology International ,Vol.40, pp 82–88

Zheng Xuebin., Huang Minhui.and Ding Chuanxian.(2000), “Bond strength of plasma-sprayed hydroxyapatite/Ti composite coatings” , Biomaterials, Vol.21, pp 841- 849.

Zhang S. , Wang Y.S. , Zeng X.T. , Cheng K. , Qian M., Sun D.E. , Weng W.J. and Chia W.Y,(2007), “ Evaluation of interfacial shear strength and residual stress of sol–gel derived fluoridated hydroxyapatite coatings on Ti6Al4V substrates”, Engineering Fracture Mechanics, Vol.74, pp 1884–1893.

Downloads

Published

05-11-2012

How to Cite

Rattan, P. V., Sidhu, T. S. ., & Mittal, M. (2012). An Overview of Hydroxyapatite Coated Titanium Implants. Asian Journal of Engineering and Applied Technology, 1(2), 40–43. https://doi.org/10.51983/ajeat-2012.1.2.2490