Characterisation of Biodiesel Derived From Waste Cotton Seed Oil and Waste Mustard Oil

Authors

  • Sandeep Singh Department of Mechanical Engineering, Thapar University, Patiala - 147 004, India
  • Sumeet Sharma Department of Mechanical Engineering, Thapar University, Patiala - 147 004, India
  • S. K. Mohapatra Department of Mechanical Engineering, Thapar University, Patiala - 147 004, India
  • K. Kundu Mechanical Engineering Research and Development Organization, Ludhiana - 141 006, India

DOI:

https://doi.org/10.51983/ajeat-2013.2.2.662

Keywords:

Waste cotton seed oil, Waste mustard oil, Transesterification, Characterisation

Abstract

Biodiesel, an alternative fuel is derived from the fats of animals and plants. As energy demand increases and fossil fuels are limited, research is directed towards alternative renewable fuels. Properties of waste oil (cotton seed oil and mustard oil) have been compared with the properties of petrodiesel, showing a comparable regime for satisfactory optimized blend which is to be selected for the better performance of a C.I. engine with biodiesel. The work presented in this paper is the study of characteristics of biodiesel prepared from vegetable oils (waste cotton seed oil and waste mustard oil). The characteristics of biodiesel are to be checked at different blends(B10, B15, B20) and select the optimum blend based on these characteristics. The characteristics include free fatty acid value, density, viscosity, flash point and fire point, cloud point and pour point, carbon residue content and ash residue content.

References

Satishchandra Shamrao Ragit (2011), “Process standardization, characterization and experimental investigation on the performance of biodiesel fuelled C.I.Engine”, PhD. Thesis, Department of Mechanical Engineering, Thapar University, Patiala.

Knothe, Van Gerpen and Krahl, The biodiesel handbook, National Center for Agricultural Utilization Research Agricultural Research Service U.S. Department of Agriculture Peoria, Illinois, U.S.A, Department of Mechanical Engineering Iowa State University Ames, Iowa, U.S.A, University of Applied Sciences Coburg, Germany 2005.

National Center for Agricultural Utilization Research, Agricultural Research Service, US Department of Agriculture, 24 January (2005) 1-10.

Van Gerpan, Biodiesel processing and production, Fuel Processing Technology, 86 (2005) 1097-1107.

Alternative Fuels and Advanced Vehicles Data Center- U.S Department of Energy, (2005).

Fangrui Ma, Milford A.Hanna, Biodiesel production: a review, Bioresource Technology, Vol. 70 (1999) 1-15.

S.Saka, D.kusdiana, Biodiesel fuel from rapeseed oil as prepared in supercritical methanol, Fuel, 80 (2001) 225-231.

Gemma Vicente, Mercedes Martınez, Jose Aracil, Integrated biodiesel production: a comparison of different homogeneous catalysts systems, Bioresource Technology, 92 (2004) 297–305.

Y. Zhang a, M.A. Dube , D.D. McLean,M. Kates , Biodiesel production from waste cooking oil: 1. Process design and technological assessment, Bioresource Technology, Vol. 89, 2003, pp.1–16.

Fengxian Qiu, Yihuai Li, Dongya Yang a, Xiaohua Li , Ping Sun, Biodiesel production from mixed soybean oil and rapeseed oil, Applied Energy, 88 (2011) 2050–2055.

Weiliang Cao, Hengwen Han, Jingchang Zhang, Preparation of biodiesel from soybean oil using supercritical methanol and cosolvent, Fuel, Vol.84, 2005, pp.347–351.

Nobutake Nakatani, Hitoshi Takamori, Kazuhiko Takeda, Hiroshi Sakugawa, Transesterification of soybean oil using combusted oyster shell waste as a catalyst, Bioresource Technology, 100 (2009) 1510–1513.

Xuejun Liu, Huayang He, Yujun Wang, Shenlin Zhu, Xianglan Piao, Transesterification of soybean oil to biodiesel using CaO as a solid base catalyst, Fuel, 87 (2008) 216–221.

Osmano Souza Valente, Vanya Marcia Duarte Pasa , Carlos Rodrigues Pereira Belchior, Jose Ricardo Sodre, Physical–chemical properties of waste cooking oil biodiesel and castor oil biodiesel blends, Fuel, 90 (2011) 1700–1702.

David Y. Z. Chang, Jose Ricardo Sodre, Physical–chemical properties of soyabean oil and its blends, Fuel, 80 (2006) 212-221.

Gerhard Knot he, Kevin R. Steidley, Kinematic viscosity of biodiesel fuel components and related compounds, Influence of compound structure and comparison to petro diesel fuel components, Fuel, 87 (2008) 1743–1748.

Narayan Khatri, Effect of physical properties of bio-diesel on combustion, performance and emissions of DI engine, University of Petroleum, Fuel, 85 (2006) 2377–2387.

Specifications for blends B6 – B20, www.astm.org.

Downloads

Published

05-11-2013

How to Cite

Singh, S., Sharma, S., Mohapatra, S. K., & Kundu, K. (2013). Characterisation of Biodiesel Derived From Waste Cotton Seed Oil and Waste Mustard Oil. Asian Journal of Engineering and Applied Technology, 2(2), 73–77. https://doi.org/10.51983/ajeat-2013.2.2.662