Optimization of Design Mix Proportion for Saturated Water Absorption of High Performance Concrete
DOI:
https://doi.org/10.51983/ajeat-2018.7.1.888Keywords:
High Performance Concrete, Nano Silica,, Copper Slag, Optimization, Taguchi MethodAbstract
This study involves the optimization of design mix proportion for saturated water absorption of high performance concrete (HPC) by Taguchi Method. In the present investigation, saturated water absorption test on 25 HPC mixes specimens made with colloidal nano silica and copper slag as replacement of cement and fine aggregate respectively has been conducted at the age of 28 days and 90 days of water curing. The concrete mixes has been replaced by 1%, 1.5%, 2%, 2.5%, 3% of nano silica and copper slag of 10%, 20%, 30%, 40%, 50%. From Signal-to-Noise ratio, the optimal parametric combination for saturated water absorption has been obtained. The Analysis of Variance has been done on experimental data values. The percentage contribution of the factors towards saturated water absorption is identified. The nano silica contributes towards less water absorption in 28 days curing, while the Copper slag found to the major contributing factor for the cause after the 90 days tenure of water curing.
References
S. Chithra, S. R. R. Senthil Kumar, and K. Chinnaraju, "The Effect of Colloidal Nano-silica on Workability, Mechanical and Durability Properties of High Performance Concrete with Copper Slag as Partial Fine Aggregate," Construction and Building Materials, vol. 113, pp. 794–804, 2016.
F. de Larrard and T. Sedran, "Mixture-proportioning of High-Performance Concrete," Cement and Concrete Research, vol. 32, pp. 1699–1704, 2002.
A. Yacoub, A. Djerbi, and T. Fen-Chong, "Water Absorption in Recycled Sand: New Experimental Methods to Estimate the Water Saturation Degree and Kinetic Filling During Mortar Mixing," Construction and Building Materials, vol. 158, pp. 464–471, 2018.
M. Quattrone, B. Cazacliu, S. C. Angulo, E. Hamard, and A. Cothenet, "Measuring the water absorption of recycled aggregates, what is the best practice for concrete production," Construction and Building Materials, vol. 123, pp. 690–703, 2016.
N. Naresh, K. Rajasekhar, and P. VijayaBhaskara Reddy, "Parametric Analysis of GFRP Composites in CNC Milling Machine using Taguchi Method," IOSR Journal of Mechanical and Civil Engineering, vol. 6, pp. 102-111, issue 1, 2013.
A. H. Sevinc and M. Y. Durgun, "Taguchi Approach for Investigating the Engineering Properties of Concretes Incorporating Barite, Colemanite, Basaltic Pumice and Ground Blast Furnace Slag," Construction and Building Materials, vol. 135, pp. 343–351, 2017.
A. A. Siyal, K. A. Azizli, Z. Man, and H. Ullah, "Effects of Parameters on the Setting Time of Fly Ash based Geopolymers by Taguchi Method," Procedia Engineering, vol. 148, pp. 302 – 307, 2016.
IS: 383-1970, Specification for coarse and fine aggregates from natural sources for concrete, Bureau of Indian Standards, New Delhi, India.
A. Mehta, R. Siddigque, B. Pratapsingh, S. Agggoun, G. Lagod, and D. Barnat-Hunek, "The Influence of Various Parameters on Strength and Absorption Properties of Fly Ash based Geopolymer Concrete by Taguchi Method," Construction and Building Materials, vol. 150, pp. 817-824, 2017.
H. Tanyildizi and M. Sahin, "Taguchi Method for Optimization of Concrete Strengthened with Polymer after High Temperature," Construction and Building Materials, vol. 79, pp. 97–103, 2015.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2018 The Research Publication
This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
