Analysis of Functionally Graded Cylinders for Different Gradation Law under Coupled Thermo-Mechanical Loading

Authors

  • Amandeep Research Scholar, Indian Institute of Technology Ropar, Punjab, India
  • Abhay Under Graduate Student,Indian Institute of Technology Ropar, Punjab, India
  • Srikant Sekhar Padhee Assistant Professor, Indian Institute of Technology Ropar, Punjab, India

DOI:

https://doi.org/10.51983/ajeat-2018.7.2.962

Keywords:

USDFLD, Functionally Graded Materials, ABAQUS, Finite Element Analysis

Abstract

Functionally graded materials are materials with tailored properties in one or more directions. This paper analyzes functionally graded cylinders with variation of properties according to various gradation laws available in literature of functionally graded materials. These gradation laws determine response of material under different loading and boundary conditions. The whole analysis is carried out in ABAQUS. USDFLD subroutine has been used for varying the material properties at elemental level. FGM cylinder under analysis has been loaded with coupled thermo-mechanical load where one surface of the plate is loaded with mechanical force and a temperature gradient is provided over the thickness of the cylinder. Another surface is free from any kind of mechanical forces. On application of force and thermal gradient maximum stresses generated and the maximum nodal temperature observed in the cylinder is compared with the failure limits considering factor of safety for the working conditions.On the basis of maximum stress observed and the corresponding nodal temperature using different gradation laws the application of these laws are justified.

References

M. Niino and S. Maeda, "Recent development status of functionally gradient materials," ISIJ Int., vol. 30, no. 9, pp. 699–703, 1990.

M. Koizumi, "Recent progress of functionally gradient materials in Japan," Ceramic Engineering and Science Proceedings, Am. Ceram. Soc., pp. 333–347, 1992.

M. Wosko, B. Paszkiewicz, T. Piasecki, A. Szyszka, R. Paszkiewicz, and M. Tlaczala, "Application and modeling of functionally graded materials for optoelectronic devices," in Proceedings of 2005 International Students and Young Scientists Workshop Photonics and Microsystems, 2005.

A. Gupta and M. Talha, "Recent development in modeling and analysis of functionally graded materials and structures," Prog. Aerosp. Sci., vol. 79, pp. 1–14, Nov. 2015.

M. Lezgy-Nazargah, "Fully coupled thermo-mechanical analysis of bi-directional FGM beams using NURBS isogeometric finite element approach," Aerosp. Sci. Technol., vol. 45, pp. 154–164, Sep. 2015.

D. K. Jha, T. Kant, and R. K. Singh, "A critical review of recent research on functionally graded plates," Compos. Struct., vol. 96, pp. 833–849, 2013.

A. H. Muliana, "A micromechanical model for predicting thermal properties and thermo-viscoelastic responses of functionally graded materials," Int. J. Solids Struct., vol. 46, no. 9, pp. 1911–1924, 2009.

T. Fuchiyama, "Analysis of thermal stress in a plate of functionally gradient material," JSAE Rev., vol. 16, no. 3, pp. 263–268, Jul. 1995.

G. Anlas, M. H. Santare, and J. Lambros, "Numerical calculation of stress intensity factors in functionally graded materials," Int. J. Fract., vol. 104, no. 2, pp. 131–143, 2000.

T. Fujimoto and N. Noda, "Influence of the Compositional Profile of Functionally Graded Material on the Crack Path under Thermal Shock," J. Am. Ceram. Soc., vol. 84, no. 7, pp. 1480–1486, 2001.

V. N. Burlayenko, H. Altenbach, T. Sadowski, S. D. Dimitrova, and A. Bhaskar, "Modelling functionally graded materials in heat transfer and thermal stress analysis by means of graded finite elements," Appl. Math. Model., vol. 45, pp. 422–438, May 2017.

P. Gu, M. Dao, and R. J. Asaro, "A Simplified Method for Calculating the Crack-Tip Field of Functionally Graded Materials Using the Domain Integral," J. Appl. Mech., vol. 66, no. 1, pp. 101–108, Mar. 1999.

W. G. Buttlar, G. H. Paulino, and S. H. Song, "- Application of graded finite elements for asphalt pavement analysis," in Computational Fluid and Solid Mechanics 2003, K. J. Bathe, Ed. Oxford: Elsevier Science Ltd, 2003, pp. 157–161.

S. Z. Feng and A. M. Li, "Analysis of thermal and mechanical response in functionally graded cylinder using cell-based smoothed radial point interpolation method," Aerosp. Sci. Technol., vol. 65, pp. 46–53, Jun. 2017.

C. P. Mark and A. Selwyn, "Design and analysis of annular combustion chamber of a low bypass turbofan engine in a jet trainer aircraft," Propuls. Power Res., vol. 5, no. 2, pp. 97–107, Jun. 2016.

Downloads

Published

07-10-2018

How to Cite

Amandeep, Abhay, & Padhee, S. S. (2018). Analysis of Functionally Graded Cylinders for Different Gradation Law under Coupled Thermo-Mechanical Loading. Asian Journal of Engineering and Applied Technology, 7(S2), 21–25. https://doi.org/10.51983/ajeat-2018.7.2.962