Design and Simulation of Photovoltaic Array

Authors

  • Tithi Anish Antani Department of Electrical and Electronics Engineering, MVJ College of Engineering, Bengaluru, India
  • Ujjwal Kumar Department of Electrical and Electronics Engineering, MVJ College of Engineering, Bengaluru, India
  • Sindhu K. Bhat Department of Electrical and Electronics Engineering, MVJ College of Engineering, Bengaluru, India
  • Soumya Mishra Department of Electrical and Electronics Engineering, MVJ College of Engineering, Bengaluru, India

DOI:

https://doi.org/10.51983/ajes-2019.8.S1.2303

Keywords:

Array, Circuit, Equivalent, Model, Modeling, Photovoltaic (PV), Simulation

Abstract

This paper illustrates a simple yet accurate method of modelling photovoltaic array. By adjusting the curve at three points: open circuit, maximum power, and short circuit, the parameter of the nonlinear equation can be determined. The information about these three major points is provided by all commercial array datasheets, using this data we can easily find the best I-V equation for the single-diode photovoltaic (PV) model. Adjusting the parameters of I–V equation, one can build a PV circuit model with any circuit simulator by using basic math blocks. The proposed circuit model and modeling method and are useful for power electronics designers who need a simple, fast, accurate, and easy-to-use modeling method for using in simulations of PV systems.

References

W. Xiao, W. G. Dunford, and A. Capel, "A novel modeling method for photovoltaic cells," in Proc. IEEE 35th Annu. Power Electron. Spec. Conf. (PESC), vol. 3, pp. 1950-1956, 2004.

M. A. Vitorino, L. V. Hartmann, A. M. N. Lima, and M. B. R. Correa, "Using the model of the solar cell for determining the maximum power point of photovoltaic systems," in Proc. Eur. Conf. Power Electron. Appl., pp. 1-10, 2007.

D. Dondi, D. Brunelli, L. Benini, P. Pavan, A. Bertacchini, and L. Larcher, "Photovoltaic cell modeling for solar energy powered sensor networks," in Proc. 2nd Int. Workshop Adv. Sens. Interface (IWASI), 2007, pp. 1-6.

H. Patel and V. Agarwal, "MATLAB-based modeling to study the effects of partial shading on PV array characteristics," IEEE Trans. Energy Convers., vol. 23, no. 1, pp. 302-310, Mar. 2008.

M. C. Glass, "Improved solar array power point model with SPICE realization," in Proc. 31st Intersoc. Energy Convers. Eng. Conf. (IECEC), vol. 1, pp. 286-291, Aug. 1996.

A. Kajihara and A. T. Harakawa, "Model of photovoltaic cell circuits under partial shading," in Proc. IEEE Int. Conf. Ind. Technol. (ICIT), pp. 866-870, 2005.

M. G. Villalva, J. R. Gazoli, and E. R. Filho, "Modeling and circuit-based simulation of photovoltaic arrays," in Proc. IEEE Int. Conf., pp. 1244-1254.

KC200GT high efficiency multicrystal photovoltaic module datasheet.

A. Kajihara and A. T. Harakawa, "Model of photovoltaic cell circuits under partial shading," in Proc. IEEE Int. Conf. Ind. Technol. (ICIT), pp. 866-870, 2005.

Q. Kou, S. A. Klein, and W. A. Beckman, "A method for estimating the long-term performance of direct-coupled PV pumping systems," Solar Energy, vol. 64, no. 1-3, pp. 33-40, Sep. 1998.

T. F. Elshatter, M. T. Elhagry, E. M. Abou-Elzahab, and A. A. T. Elkousy, "Fuzzy modeling of photovoltaic panel equivalent circuit," in Proc. Conf. Record 28th IEEE Photovoltaic Spec. Conf., pp. 1656-1659, 2000.

Downloads

Published

02-06-2019

How to Cite

Antani, T. A., Kumar, U., Bhat, S. K. ., & Mishra, S. . (2019). Design and Simulation of Photovoltaic Array. Asian Journal of Electrical Sciences, 8(S1), 65–70. https://doi.org/10.51983/ajes-2019.8.S1.2303